Neo-6m Gy-Neo-6mv2 GPS Module for Arduino with Antenna

• Customization: Available
• Usage: Telephone, Mobile phone
• Type: GSM/GPRS Module
• Model NO.: CSC-7253
• Support Network: GSM
• Information content: Data
• Certification: CE
• Condition: New
• Chipset: Original
• Application: Popular
• Name: Neo-6m Gy-Neo-6mv2 GPS Module
• OEM: Provided
• Transport Package: in Bulk
• Specification: 1 Unit per pack
• Trademark: Original Brand
• Origin: Guangdong, China
• Production Capacity: 100000 Piece/Pieces Per Month

Product Description

 

NEO-6M GY-NEO-6MV2 for GPS Module For Arduino With Antenna

 

GPS Module Features:

• Input Supply Voltage Range: 3.7V-6V, onboard voltage regulator maintains 3.3V
• I/O Maximum Logic Level: 3.6V
  • We have tested it with a direct connection to the 5V serial pins on an Arduino and found it to work fine but extended periods of time may be different
  • To use with a 5V logic device, such as an Arduino, we suggest level shifting the 5V TX signal using one of the following:
    • Two 1N4148 diodes in series between the TX pin on your 5V device and the RX pin on this GPS module (will drop the voltage to ~3.6V)
      • Only recommended for baud rates of 9600 and less
    • Use a logic level converter module such as the Addicore Bi-Directional Logic Level Converter
• WAAS (Wide Area Augmentation System) enabled GPS unit
• <1 second to first fix (TTFF) for hot starts
• 27 seconds to first fix (TTFF) for cold starts
• Onboard LED will blink after the module acquires a position fix and will continue blinking as long as the module has a fix
• 50 Channel NEMA GPS receiver
• UART: 9600 baud by default, but is configurable from 4800 to 115200 baud
• 5Hz max update rate
• External EEPROM for configuration storage
• Four plated mounting holes, 3mm in diameter
• One additional non-plated mounting/antenna cable hole, 4mm in diameter
• Position Accuracy: 2 m and better with multiple good satellite signals
• Velocity Accuracy: 0.1 m/s
• Maximum Velocity: 500 m/s
• Heading Accuracy: 0.5 degrees while moving
• On-board battery for battery-backed RAM (BBR)
  • The battery is recharged through a simple diode and resistor charger circuit from the onboard voltage regulator's 3.3V output
• Three different power modes (refer to Receiver Description Including Protocol Specification in the documents for information on configuring the operating mode)
  • Two continuous operating modes:
    • Maximum Performance Mode - continuously uses the acquisition engine, resulting in the best possible time to first fix (TTFF)
    • Eco Mode - optimizes the use of the acquisition engine to minimize current consumption
  • One intermittent operating mode
    • Power Save Mode - draws a mear 11mA - Utilizes cyclic tracking, with configurable update periods, which reduces the average power consumption significantly
• -156dBm Hotstart sensitivity
• Weight: 17.6g (0.6oz)
• Dimensions of GPS Module: 36mm (1.42″) x 25.8mm (1.02″) x 4mm (0.16″)
• Dimensions of Antenna: 25.5mm (1″) x 25.5mm (1″) x 8.8mm (0.35″)

 

Product Description

We provide supply solution for Arduino,Raspberry Pi,Micro:bit compatible accessories! Line card including Development Boards,Sensors,Shield Boards,Relay Module,LCD Display Modules,Cables,Kits etc.

 

Development Boards You May Interest:

 

Modules You May Interest:

 

Kits You May Interest:

 

Accessories You May Interest:

 

Currently we exported to USA,Canada,Germany,France,Italy,Czech,Romania,Uruguay,Colombia,Costa Rico,Ecuador,Brazil,Argentina,Korea,Vietnam,India etc.,most of them are project user and STEM education fields(DIY Kits). 

If you have detail sourcing list,freely drop back to us.

 

 

FAQ

• Question:I am interested in your product,how I place order?
• Answer:You can send us inquiry or place order online via trade assurance,fill in the quantity,then clieck"Start Order".If your required quantity is much more,please inquire us to talk details.
• Question:What kind of payment you accept ?
• Answered byShenzhen Chengsuchuang Technology Co.,Ltd :Bank Transfer,Trade Assurance,Western Union acceptable.
• Question:What kind of currency you accept ?
• Answer:Usually,we accept USD as default currency.Of course other currency are able to accept according to your final requirments,like CNY,GBP,EURO Dollar etc.
• Question:What deal terms you accept?
• Answer:Usually we deal via EX-W or FOB Shenzhen Terms,for small order cargo shipment,EX-W+Express Shipping cost.Of course,they are able to discuss according to your request,in case you have forwarder in our local place to proceed,shipment can be arranged there also.
• Question:What's the lead time after we placed order?
• Answer:Usually,the lead time counted from the date payment received,if you are urgent to order shedule,please make sure the payment can be proceed as soon as possible.We will proceed the order within 1-3 days usually,and shipment usually take about 1 week for small order quantity,if quantity is more,please contact us to confirm.For project order lead time,please check our sales quotation as refference.

• Are you able to manufacture?
• Answer:Yes,we have production workplace for electronics hardware customized project is welcome,please contact us to talk more details.PCB design and PCB Assemble solution provided.If you have sample,quotation can be provided to us.